€1,599.00*
Content: 1 piece
Article will be ordered for you
Shipping: within approx. 2 weeks
Shipping: within approx. 2 weeks
Product number: NEW-3463
Your advantages with us:
EU-wide shipping safe & free from 450 €
Your home cinema and HIFI
partner since 2008
partner since 2008
30 Day money back guarantee
Product information "Musical Fidelity A1 integrated amplifier"
- Musical Fidelity A1 integrated amplifier
- after its initial release in 1988, now re-introduced three decades later
- with updated transformers, power supplies and modern low-noise components.
- after its initial release in 1988, now re-introduced three decades later
- with updated transformers, power supplies and modern low-noise components.
After its initial release in 1988, the Musical Fidelity A1 integrated amplifier has now been re-introduced three decades later with updated transformers, power supplies and modern low-noise components.
It is based on a fully discrete and symmetrical Class A topology and enables 25 watts of pure Class A power at 8 ohm load and 25 amps. If the standby current of Class A is exceeded, the amplifier automatically switches to Class B, temporarily enabling the further required current consumption.
AMPLIFIER: | |
POWER | 25 watts per channel at 8 ohms |
VOLTAGE | 42.5 volts peak-to-peak |
CURRENT | 25 amps peak to peak |
DAMPING | 150 |
GAIN (MAX. VOLUME) | 32 dB (Direct mode), 42 dB (Normal mode) |
OUTPUT DEVICES | 2 per channel |
SIGNAL/NOISE RATIO | 82 dB |
CHANNEL SEPARATION | 85 dB |
FREQUENCY RESPONSE | + 0, –1 dB, 10 Hz to 40 kHz |
LINE LEVEL SENSITIVITY | 300 mV rms nominal, 8 V rms max |
IMPEDANCE OF LINE LEVEL INPUTS | 25 kOhm |
TAPE OUT IMPEDANCE | 220 Ohm |
PREAMP OUTPUT IMPEDANCE | 100 Ohm |
PHONO PRE-AMPLIFIER: | |
PHONO RIAA RESPONSE | +/- 1 dB |
MM SENSITIVITY | 5 mV nominal |
MM CAPACITY/IMPEDANCE/GAIN | 100 pF / 50 kOhm / 40 dB |
MM SIGNAL/NOISE RATIO | 75 dB |
MC SENSITIVITY | 450 μV nominal |
MC IMPEDANCE/GAIN | 1 kOhm / 60 dB |
MC SIGNAL/NOISE RATIO | 70 dB |
INPUTS | 1x Phono RCA MM/MC, 5x Line RCA |
OUTPUTS | 1 x line level RCA fixed TAPE-OUT, 1 x line level RCA with PRE-OUT, 1 x 4mm banana/clamp terminals, SPEAKER OUTPUT |
GENERAL INFORMATION: | |
DIMENSIONS (WxHxD) | 440 x 68,3 x 283,3 mm |
MAIN VOLTAGE | 230V/115V internally set or 100V optional |
MAX. CONSUMPTION | 130 W, 0 W in standby (=power switch OFF) |
WEIGHT | 10,5 kg |