Musical Fidelity MX VYNL Phono Amplifier
Prices 775.03 € with bank transfer in advance, incl. VAT free shipping
Article is ordered, delivery time at least 1-3 Workdays
- Order number: 12389.1

Musical Fidelity MX Vynl Phono Amplifier
The MX-VYNL is a fully balanced, i.e. double-mono phono preamplifier of the highest standard that is capable of perfectly operating almost any pickup, be it a moving magnet or a moving coil pickup. A pleasure to listen to. The MX-VYNL offers both traditional cinch inputs and our unique, fully balanced XLR connectors because of its consistently symmetrical design. Thanks to the two inputs, two turntables can be connected simultaneously and switched between them. The MX-VYNL offers a wide range of input impedance settings for MC and multiple capacitance settings for MM scanners. Unlike many competing products, the MX-VYNL allows you to easily adjust these settings while playing. This capability allows experiments and tuning for optimal adjustment. Integrated in the MX-VYNL is also our proven RIAA correction, which offers extremely accurate results up to 80kHz. This may sound extreme, but there is a good amount of information beyond 20 kHz that needs to be corrected. If that doesn't happen, it'll turn out to be ringing and overshooting. Both the extremely low noise and the extraordinarily high dynamic range predestine the MX-VYNL for technically difficult pickups and fulfils the tonal wishes of even the most demanding listeners. Technical Data: - Output 4 Volt RMS at Cinch connectors 8 Volt RMS balanced at XLR connectors Frequency response: RIAA ±0.1dB IEC ±0.1dB Moving Magnet (MM): Channel separation: < -86dB Signal-to-noise ratio: < -101dB Distortions (THD: < 0.007% XLR input: 5mV / 2.5mV selectable, 70mV max (23dB drive range) Moving Coil (MC): Channel separation: < -83dB Signal-to-noise ratio < -98dB Distortions (THD): < 0.01% XLR input: 0.8mV / 0.4mV selectable, 12mV max. (24dB drive range) - Inputs Balanced Mini-XLR RCA 1 pair Cinch connectors Outputs Balanced XLR male connectors EIA Standard RS-297-A Asymmetrical Cinch connectors - Power connector: 1.3mm power plug External power supply: 12V/500mA DC voltages 100-240VAC 50-60Hz universal Worldwide power supply Power consumption < 8 Watt - Weight Packed / unpacked: 1.9 Kg / 2.4 Kg - Dimensions Width 220 mm Height (with feet) 53 mm Depth 215 mm