Stax SR-L700 MK2

Stax SR-L700MK2

The first SR-Lambda series was introduced 36 years ago and has evolved into a new generation of SR-Lambda with its redesigned cabinet - the new SR-L700 Advanced Lambda Series Earspeaker.

High quality sound element

The hand-picked thin-film diaphragm SR-009 and fixed electrodes produced by three-layer stainless steel etching by heat diffusion were used for the SR-L700 clay element. The result is a rich deep bass, a delicate high frequency and a soothing midrange in a well balanced sound.

10-click type headband mounting

The SR-L700 headgear (ARC) is equipped with a 10-click sliding mechanism for adjusting the headrest height according to SR-009. Once set, the slider always maintains its optimal position to make readjustment unnecessary. So you can enjoy hours of pleasant music with the highest comfort.

wide hybrid cable

6NCu with LOW CAPACITY For the core wires high purity copper wires with 99.99999% and for the circumference six silver plated high purity copper wires with 99.9999% are used. The entire cable uses the conventional wide format parallel structure to reduce the capacitance between the individual wires and has the most suitable structure to drive the earphone.

Technical data

• Type: Oval electrostatic push-pull headphones with open back
• Frequency response: 7 - 41,000 Hz
• Electrostatic capacity: 110pF (including cable)
• Impedance: 145 kΩ (including cable, at 10 kHz)
• Sound pressure sensitivity : 101dB / 100V effective 1 kHz
• Maximum sound pressure : 118 dB / 400 Hz
• Bias voltage : 580 V DC
• Left and right marking: "L" and "R" on the arc assembly The cable of the left channel is marked with a solid line. The right channel is marked with a dotted line.
• Ear pads: genuine lamb leather (direct skin contact), high-quality artificial leather (surrounding part)
• Cable: Silver-plated 6N (99.9999%) OFC parallel cable with 6 strands and low capacitance, 2.5 m full length
• Weight: 0.8 lb without cable / 1.1 lb with cable